180L Replacement Fuel Tank

Petrol Only



  • Comprehensive Fitting Kit and Instructions


  • Fully Baffled For Better Fuel Usage And Stronger Tank Design


  • Pre-Drilled Holes In Mounting Brackets For Fast & Easy Installation





  • Part Number: TR58WFIL


  • Model Fitment: 76 Series Wagon (with 90L O/E tank)


  • Year Fitment: 2007 to 08/2012


  • Fuel Type: Petrol


  • LongRanger Capacity: 180 Litres (Replaces the 90lt OEM tank)


  • Fitting Location: Replaces OEM Tank Behind Rear Axle


  • Exhaust Modifications: None


  • Other Modifications: This Tank Is Best Fitted Before A Kaymar Rear Bar. If Bar Is Fitted First You Will Need To Temporarily Remove Bar To Install The Rear Mounting Bolts For The Long Ranger Fuel Tank, see picture in gallery for rear mounting bolt location. The Fuel Gauge Will Stay On Full Until Approximately The First 35L Has Been Used


  • Fitting Time: 3 Hours Fitting Time info


  • Shipping Weight: 55 KG


  • Shipping Dimensions: 1050mm x 530mm x 900mm


Note: These versions are for petrol export vehicles available outside of Australia.

We offer two capacities, our standard version is 166lt offing excellent ground clearance, the 180lt tank is the same basic shape as our standard 166lt but sits 20mm lower.





Does the tank have anti-surge dam and baffles

Yes, to maximise fuel usage from the new larger tank we have baffles and a built in chamber around the fuel pickup unit to help avoid pickup cavitation sucking in air, these features can be especially useful when accidentally running low on fuel or driving on sloping terrain.
With larger tanks having bigger surface areas baffles also help add strength for those odd knocks and dents you can’t avoid.

Will the fuel gauge still work

During the fitting we modify the OEM sender to suit the new tank but due to baffles etc restricting the location of the float arm the gauge will stay on full till approximately the first 35lt has been used.

Does The Long Ranger have a drain plug

Yes, although some OEM and aftermarket tanks don’t come fitted with a drain plug we believe this is a must have feature when traveling the outback as you never know if you have to drain the tank in the advent of picking up a bad load of fuel.

My vehicle is around the date of the changeover between models for the Wagon, how do I know which tank to choose?

The changeover date between models that use a TR58WDC or a TR58W is from 7-2012 to 8-2012.
Generally the pre 7-2012 vehicles with a 90lt OEM tank will use Longranger part number TR58W and the post 8-2012 vehicles with a 130lt OEM tank will use Longranger part number TR58WDC.
However we are aware of different models around the world, some with a V8TD engine that use the old tank and some with a 6cyl engine that use the new tank. See the below picture for the OEM mounting system that helps determine what to look for to choose your model of Longranger.

Tank Differences

{"single_open":"true","transition_speed":"300"}


I work for the Rural Fire Service – how will this tank go if I get caught out in a fire.

While the OEM tank is made of plastic and could melt allowing the fuel to catch fire and greatly decrease the chance of survival all our Longrange tanks are made from 2mm aluminsed steel which will last much longer in these situations greatly increasing the chances of your survival.  Below is a good picture showing a Landrover Defender which had the plastic OEM tank replaced for use by the RFS showing all the other precautions to take such as rapping the fuel lines with fireproof lagging.

Does the tank have anti-surge dam and baffles

Yes, we have both incorporated in our design.
While it is obviously cheaper for some aftermarket and OEM manufacturers to build a tank without baffles, to maximise fuel usage from the new larger tank we believe a good design should have baffles and a built in chamber around the fuel pickup unit to help avoid pickup cavitation sucking in air, these features can be especially useful when accidentally running low on fuel or driving on sloping terrain.
With larger tanks having bigger surface areas and often a bit lower to the ground baffles also help add strength for those odd knocks and dents you cant avoid. A tank without baffles could flex up when hit by obsticles and damage the internal fuel pump that is sitting on the bottom of the tank.

 

{"single_open":"true","transition_speed":"300"}


Does this long ranger fuel tank fit with towbars

Generally we try to make our tanks fit with most towbars on the market at the time we design our tank, occasionally a particular towbar is built in such a way that to make our tank compatible would result in very little extra fuel capacity gained,  if there are any known issues with specific models we mention this on the specifications tab under “other mods”

{"single_open":"true","transition_speed":"300"}


Where are the tanks made

While there is a popular belief that all the big brands are made in a country with a cheap manufacturing base in the same factory with a different badge at The Long Ranger we still design and manufacture our tanks in Australia were it all started way back in the late 70’s.  We are a family run company based in Newcastle employing local people and that’s not about to change anytime soon.

Is the GVM (Gross Vehicle Mass) affected

No, adding a tank is the same as any other accessory and is utilising the vehicles payload capacity IE: anything added to the vehicle from the manufactures specification is using the payload capacity, whether it be driving lights, a set of rubber mats, a LongRanger fuel tank or the kids. As with most vehicles from a manufacturer the standard springs are not designed to cope with a constant full load on an extended trip, we recommend fitting a set of heavier rated springs such as those from Old Man Emu that have been designed to carry the extra weight of a fully loaded vehicle set up for camping.

Do the tanks come complete ready to fit

Yes they do, you may have heard on the grape vine that some aftermarket tank suppliers ship their products with poor fitting instructions and incomplete kits that make a trip to the local auto store a necessity to finish the job. At the LongRanger we supply comprehensive installation instructions with lots of photos to ensure the job is done as efficiently as possible and a complete installation kit ready to install so your local fitter can be rest assured there will be no expensive delays sourcing bits and pieces to finish the job!

Do I need an extra protection plate

Standard OEM fuel tanks manufactured with plastic construction or thin turn plate often require an extra bash plate for protection. Being made from 2mm “aluminised steel” with internal baffling our tanks are designed to handle the odd scrap and dint you would expect with general 4wd use or outback touring and offer excellent strength and durability in these situations. Depending on your intended vehicle use if you often find when out on the trail turning back is not an option and your forced to test your vehicle to it’s limits or if you’ll be doing lots of hard off roading in steep and rocky terrain we may have other options more suitable for you such as a smaller tank with more ground clearance or a “HD” version with a heavy duty protection plate welded directly to the bottom of the tank.

Is the LongRanger design compatible with other accessories

There is nothing worse than buying an accessory to find it’s not compatible with something else you have fitted, we might not be first to market, but that’s because we try our best to design our long range tanks to be suitable with all models in the range and most other popular accessories you might want to install either now or in the future. Although we have designed our tanks with maximum compatibility in mind, if you have something specially fitted to your vehicle that is of concern we have provided a good selection of pictures in the gallery showing the installation to give a clear idea where The LongRanger fits under the vehicle.

Where can I purchase a LongRanger fuel tank

If you can’t make it to the Newcastle factory at 65 Northville Drive Barnsley NSW, all our products are distributed by ARB 4×4 accessories. For sales and support around Australia you can find a list of all the ARB stores Here

How long is the warranty period

All LongRanger manufactured products are covered by a 3-year warranty.
Note: There are some third party components not made by The LongRanger such as fuel pumps, sender units and switches etc found in some kits that come with their own 12 month manufacturers warranty.

What are the tanks made from

All LongRanger fuel tanks are made from Aluminised steel. This product is manufactured by the steel mill using 2mm (14gauge) cold rolled steel with a thin aluminium coating applied during the manufacturing process. Aluminised steel offers excellent weight vs. strength and durability when compared to lighter aluminium that just doesn’t have the raw strength to stand up to the hard knocks the underneath of a vehicle can suffer or the heavier Stainless steel that is more prone to fatigue cracks caused by embrittlement in the heat affected zone from the welding process.

{"single_open":"true","transition_speed":"300"}


Adobe Acrobat Reader is required to view PDF files. This is a free program available from the Adobe web site. Follow the download directions on the Adobe web site to get your copy of Adobe Acrobat Reader

pdfTR58WFIL Promotional Brochure 



 

Have you got a unique setup?


Below is a list of standard accessories we have checked for compatibility with our tanks and strive to ensure compatibility with.
Alternatively if you have something a little different please check our pictures and advise the sales staff to allow extra time for fitting if you think you have something that might cause a problem on the day or if you are planning an extensive list of modifications to your truck use our pictures to make sure our tank will fit in with your plans for the best chance to get it setup the way you want.
As our fuel and water tanks are designed to make use of space under your vehicle anything else fitted could cause and issue on the day of fitting, things such as trundle draws, air tanks, tipper trays, water tanks, custom trays with low floors, batteries, extra tyre, structural chassis changes etc can all cause an unexpected issue, delays or even non fitting in a worst case scenario.

 

While our tanks have been primarily designed to fit Australian models prior to early 2000, Since then car manufacturers have been getting smarter and making their cars on global platforms so they generally fit vehicles of the same model in other countries.
Your local ARB dealer may be able to assist with any fitment questions as they may have some prior experience with your particular model.
Another good resource is to check our photo gallery for an idea of the shape and location of our tank.  Some common areas to look for possible issues with models in other countries would be: is the filler on the same side, do the chassis look the same around the tank location, If choosing a replacement tank, is the genuine tank the same capacity as with the genuine Australian spec model, Does the exhaust run in the same place, Do you have different genuine or non-genuine accessories fitted that may not be available in Australia for us to verify that may be affected with a new fuel tank.

This tank has been designed for petrol (gas) Land Cruiser wagons with a 90lt OEM tank behind the rear axle, so far it has been fitted to vehicles in China and the Middle East

 

ledaLeading Edge Deflection Angle. Incorporating a leading edge deflection angle on the front lower section of the fuel tank allows road debris to be easily deflected.  This means the tank is marginally smaller in capacity, but in those tricky situations going over mounds of dirt and rocks you are less likely to get hung up than on a tank which hangs to low with a square leading edge.

 


max-foldMax Fold. Using this feature we maximise the sheet by making the base of the fuel tank from one side to the other in one continuous piece of metal.  This ensures the minimum amount of heat and possible stress from welded joins.

 


hptHydrostatic Pressure Test. At The LongRanger factory each & every fuel & water tank undergoes a pressure test while being placed under water at a maximum of 5 psi.

 


pac-manPac-Man. You guessed it, we have pacmen inside our tanks working away to help strengthen the high stress areas. While your happily driving along those rough corrugated outback dirt roads listening to your favourite country music in the air-conditioned comport of your new 4WD, these little guys are busy working away holding things together while the underside of your vehicle is coping a pounding.

 


shapeShape. Good design practices are what make a fuel tank both usable and functional. Some manufactures build cheap large sheet metal boxes and bolt them under a vehicle and call it a fuel tank. At the LongRanger we take the design a little more serious. Attention to detail and decades of experience building tanks has taught us what it takes to make a great product.

 


pbsParallel Break Strengthening. Just like CBS this feature aids in the stiffening of large flat panels and reduces the risk of a fuel or water tank suffering from fatigue related stress cracks when travelling on extreme corrugations. We usually incorporate these on the very bottom of a tank.

 


bafflesBaffles. help add strength to the bottom of a tank, this is especially important for a 4WD when bottoming the tank out on obstacles with the pickup unit sitting on the bottom which could be damaged, if the new tank design is lower than the OEM tank this is even more important with the tank being more vulnerable to accidental obstacle contact. A well designed longrange tank should incorporate baffles for improved offroad performance as baffles also help retain the fuel around the pickup unit.  With longrange tanks generally being longer or wider than the OEM tank when low on fuel it can “run away” from the pickup when driving in undulating terrain and possibly cause the engine to starve for fuel leaving you in an unpredictable situation and potentially unsafe location.


3 Year Warranty

3 YEAR WARRANTY

Tanks will be free from any manufacturing defects in materials or workmanship for a period of Three Years from the date of purchase.

Manufactured By

MANUFACTURED BY

It was during the late 70’s that Fred Black, owner of Out of Town 4WD, recognised a need for 4WD travellers to have a greater fuel capacity to travel the vast distances often necessary in Australia.

Distributed By

DISTRIBUTED BY

Today, ARB is Australia’s largest manufacturer and distributor of 4×4 accessories. With an office in the USA and an export network that extends through more than 100 countries around the globe.

Back to top