36L RHS Stainless Steel Water Tank

Water Only



  • Stainless Steel Construction


  • Complete Fitting Kit


  • Australian Made



  • Part Number: TW04SS


  • Model Fitment: All Live Axle Front End Models – Not Compatible With Aftermarket Steps


  • Capacity: 36 Litres


  • Fitting Location: Right Hand Side Sill


  • Filler Location: Under Bonnet


  • Other Modifications: Stainless Steel Construction – Gravity Feed To Tap Behind Front Mud Flap, Additional Outlet Can Be Fitted For Shower Unit etc


  • Fitting Time: 1 1/2 Hours Fitting Time info


  • Shipping Weight: 18 KG


  • Shipping Dimensions: 1090 mm x 490 mm x 235 mm











Adobe Acrobat Reader is required to view PDF files. This is a free program available from the Adobe web site. Follow the download directions on the Adobe web site to get your copy of Adobe Acrobat Reader

pdfTW04SS Promotional Brochure 



[table “TW04SS-Compatibility” not found /]

Have you got a unique setup?


Below is a list of standard accessories we have checked for compatibility with our tanks and strive to ensure compatibility with.
Alternatively if you have something a little different please check our pictures and advise the sales staff to allow extra time for fitting if you think you have something that might cause a problem on the day or if you are planning an extensive list of modifications to your truck use our pictures to make sure our tank will fit in with your plans for the best chance to get it setup the way you want.
As our fuel and water tanks are designed to make use of space under your vehicle anything else fitted could cause and issue on the day of fitting, things such as trundle draws, air tanks, tipper trays, water tanks, custom trays with low floors, batteries, extra tyre, structural chassis changes etc can all cause an unexpected issue, delays or even non fitting in a worst case scenario.

[table “TW04SS-Accessories” not found /]

While our tanks have been primarily designed to fit Australian models prior to early 2000, Since then car manufacturers have been getting smarter and making their cars on global platforms so they generally fit vehicles of the same model in other countries.
Your local ARB dealer may be able to assist with any fitment questions as they may have some prior experience with your particular model.
Another good resource is to check our photo gallery for an idea of the shape and location of our tank.  Some common areas to look for possible issues with models in other countries would be: is the filler on the same side, do the chassis look the same around the tank location, If choosing a replacement tank, is the genuine tank the same capacity as with the genuine Australian spec model, Does the exhaust run in the same place, Do you have different genuine or non-genuine accessories fitted that may not be available in Australia for us to verify that may be affected with a new fuel tank.

 

CBS

Cross Break Strengthening. This is a simple and effective feature to aid in the stiffening of large flat panels. This technique reduces the risk of a fuel or water tank suffering from fatigue related stress cracks when travelling on extreme corrugations.

 


ledaLeading Edge Deflection Angle. Incorporating a leading edge deflection angle on the front lower section of the fuel tank allows road debris to be easily deflected.  This means the tank is marginally smaller in capacity, but in those tricky situations going over mounds of dirt and rocks you are less likely to get hung up than on a tank which hangs to low with a square leading edge.

 


max-foldMax Fold. Using this feature we maximise the sheet by making the base of the fuel tank from one side to the other in one continuous piece of metal.  This ensures the minimum amount of heat and possible stress from welded joins.

 


hptHydrostatic Pressure Test. At The LongRanger factory each & every fuel & water tank undergoes a pressure test while being placed under water at a maximum of 5 psi.

 


pac-manPac-Man. You guessed it, we have pacmen inside our tanks working away to help strengthen the high stress areas. While your happily driving along those rough corrugated outback dirt roads listening to your favourite country music in the air-conditioned comport of your new 4WD, these little guys are busy working away holding things together while the underside of your vehicle is coping a pounding.

 


shape

Shape. Good design practices are what make a fuel tank both usable and functional. Some manufactures build cheap large sheet metal boxes and bolt them under a vehicle and call it a fuel tank. At the LongRanger we take the design a little more serious. Attention to detail and decades of experience building tanks has taught us what it takes to make a great product.

 


pbsParallel Break Strengthening. Just like CBS this feature aids in the stiffening of large flat panels and reduces the risk of a fuel or water tank suffering from fatigue related stress cracks when travelling on extreme corrugations. We usually incorporate these on the very bottom of a tank.

 


bafflesBaffles. help add strength to the bottom of a tank, this is especially important for a 4WD when bottoming the tank out on obstacles with the pickup unit sitting on the bottom which could be damaged, if the new tank design is lower than the OEM tank this is even more important with the tank being more vulnerable to accidental obstacle contact. A well designed longrange tank should incorporate baffles for improved offroad performance as baffles also help retain the fuel around the pickup unit.  With longrange tanks generally being longer or wider than the OEM tank when low on fuel it can “run away” from the pickup when driving in undulating terrain and possibly cause the engine to starve for fuel leaving you in an unpredictable situation and potentially unsafe location.


 

3 Year Warranty

3 YEAR WARRANTY

Tanks will be free from any manufacturing defects in materials or workmanship for a period of Three Years from the date of purchase.

Manufactured By

MANUFACTURED BY

It was during the late 70’s that Fred Black, owner of Out of Town 4WD, recognised a need for 4WD travellers to have a greater fuel capacity to travel the vast distances often necessary in Australia.

Distributed By

DISTRIBUTED BY

Today, ARB is Australia’s largest manufacturer and distributor of 4×4 accessories. With an office in the USA and an export network that extends through more than 100 countries around the globe.

Back to top