- Part Number: TA89P
- Model Fitment: Fits All JT Gladiator Petrol Post 2020 With A V6 Engine
- Fuel Type: Petrol (Gas)
- LongRanger Capacity: 70 Litres (153L Total When Combined With Factory 83L Tank)
- Fitting Location: Between Prop Shaft & Left Hand Side Chassis Rail
- Filler Location: Original, Twin Filler Installed
- Fuel Transfer: Transfer Pump (Supplied With Automatic Pump Cut Off, Gauge & Sender Unit)
- Exhaust Modifications: None
- Other Modifications: Additional Carbon Canister supplied with complete kit
HD version available with an extra 3mm bash plate #TA89pHD
- Fitting Time: 5.5hr Hours Fitting Time
- Shipping Weight: 39 KG Standard – 45 KG Heavy Duty
- Shipping Dimensions: 1230 mm x 480 mm x 650 mm
The Long Ranger
Your local ARB dealer may be able to assist with any fitment questions as they may have some prior experience with your particular model.
Another good resource is to check our photo gallery for an idea of the shape and location of our tank. Some common areas to look for possible issues with models in other countries would be: is the filler on the same side, do the chassis look the same around the tank location, If choosing a replacement tank, is the genuine tank the same capacity as with the genuine Australian spec model, Does the exhaust run in the same place, Do you have different genuine or non-genuine accessories fitted that may not be available in Australia for us to verify that may be affected with a new fuel tank.
Carbon Canister. When adding additional fuel capacity there is a legal and moral requirement to install a larger or secondary carbon canister.
Carbon canisters contain activated carbon which absorb and store fuel vapour to reliably reduce the emission of hydrocarbons and pollutants into the atmosphere.
Every petrol tank has a pressure balance pipe, which ensures that no vacuum develops as the tank is emptied, and that heating and expansion of the fuel does not create overpressure in the tank. When overpressure is relieved the fuel fumes that escape are routed through the system breather to the activated carbon where they are captured and stored.
When driving the car these hydrocarbons are burned during normal operation as they are purged via a vacuum line from the engine drawing fresh air back through the canister.
Since 2015 LongRanger is the only brand available in Australia to embark on a major initiative which will eventually see all required models shipped with a carbon canister as a standard feature.
This industry first is part of The LongRanger’s efforts for a more sustainable environment.
Switch/Gauge Timer. All you have to do is turn the transfer pump on when your main tank gets to ¼ full, our timer module will take care of the rest.
No worrying about when to turn it off, no annoying buzzers.
A neat round profile including a LED display with push button switch for transferring fuel. The switch/gauge has an automatic dimming function for easy on the eye night driving. With its small footprint (20mm hole x 65mm depth) this unit will fit neatly into just about any modern vehicle.
Another unique feature incorporated in most of our Auxiliary tanks is the timer function to turn the transfer pump off automatically. We have incorporated two timers to turn the pump off, these are activated when the auxiliary tank is getting low or when the main tank is almost full. The timer modules are set at our factory to suit each tank and shipped ready to use as the settings vary depending on the size of the Auxiliary and Main tanks.
A comprehensive owners operating manual is provided in our fitting kit outlining all the details to maximise the use of this great feature. Along with the LED bar style gauge we have a “pump on” light to remind you it is transferring fuel and when the pump has entered the countdown mode to turn off automatically it will start to flash to let you know it’s almost completed the transfer. Switch/Gauges are covered by the manufacturers 12 month warranty.
Leading Edge Deflection Angle. Incorporating a leading edge deflection angle on the front lower section of the fuel tank allows road debris to be easily deflected. This means the tank is marginally smaller in capacity, but in those tricky situations going over mounds of dirt and rocks you are less likely to get hung up than on a tank which hangs to low with a square leading edge.
Max Fold. Using this feature we maximise the sheet by making the base of the fuel tank from one side to the other in one continuous piece of metal. This ensures the minimum amount of heat and possible stress from welded joins.
Hydrostatic Pressure Test. At The LongRanger factory each & every fuel & water tank undergoes a pressure test while being placed under water at a maximum of 5 psi.
Transfer Pump. The LongRanger exclusively uses Solid State cube pumps. These units have been proven on thousands of applications. Solid state pumps are covered by the manufacturers 12 month warranty. Read More
The Long Ranger Fuel Hose.
The LongRanger fuel delivery hose is manufactured to SAE standards. Our fuel hose can be used in applications such as: Automotive fuel lines, emission control hose and commercial usage. Suitable for both diesel, leaded and unleaded fuels. Read More
Pac-Man. You guessed it, we have pacmen inside our tanks working away to help strengthen the high stress areas. While your happily driving along those rough corrugated outback dirt roads listening to your favourite country music in the air-conditioned comfort of your new 4WD, these little guys are busy working away holding things together while the underside of your vehicle is coping a pounding.
Sender Unit. To ensure the safe operation of your vehicle it is important to be reliably informed about the current fuel level at all times. Our 0-90 ohms senders measure the level in the tank and send the information to the LED display. The fuel sending unit has a float that connects itself to the metal rod. The end of this rod is connected to the variable resistor that resists the electrical flow. Our sender units are covered by the manufacturers 12 month warranty.
Shape. Good design practices are what make a fuel tank both usable and functional. Some manufactures build cheap large sheet metal boxes and bolt them under a vehicle and call it a fuel tank. At the LongRanger we take the design a little more serious. Attention to detail and decades of experience building tanks has taught us what it takes to make a great product.
Parallel Break Strengthening. Just like CBS this feature aids in the stiffening of large flat panels and reduces the risk of a fuel or water tank suffering from fatigue related stress cracks when travelling on extreme corrugations. We usually incorporate these on the very bottom of a tank.
Baffles. help add strength to the bottom of a tank, this is especially important for a 4WD when bottoming the tank out on obstacles with the pickup unit sitting on the bottom which could be damaged, if the new tank design is lower than the OEM tank this is even more important with the tank being more vulnerable to accidental obstacle contact. A well designed longrange tank should incorporate baffles for improved offroad performance as baffles also help retain the fuel around the pickup unit. With longrange tanks generally being longer or wider than the OEM tank when low on fuel it can “run away” from the pickup when driving in undulating terrain and possibly cause the engine to starve for fuel leaving you in an unpredictable situation and potentially unsafe location.